Pwodwi yo
-
Kas an fè doub disk balanse valv chèk
1.Presyon travay: 1.0Mpa/1.6Mpa/2.5Mpa
2. Tanperati travay:
NBR: 0 ℃ ~ + 80 ℃
EPDM: -10 ℃ ~ + 120 ℃
VITON: -20℃～+180℃
3. fas a fas selon DIN3202K3, ANSI 125/150
4. Bride selon EN1092-2, ANSI 125/150 elatriye.
5. Tès: DIN3230, API598.
6. Mwayen: Dlo Fre, dlo lanmè, bagay manje, tout kalite lwil oliv, asid, likid alkalin elatriye.
-
Cast Iron Single disk balanse valv chèk
1. Travay presyon: 1.0Mpa/1.6Mpa/2.5Mpa
2. Tanperati travay:
NBR: 0 ℃ ~ + 80 ℃
EPDM: -10 ℃ ~ + 120 ℃
VITON: -20℃～+180℃3. fas a fas selon ANSI 125/150
4. Bride selon EN1092-2, ANSI 125/150 elatriye.
5. Tès: DIN3230, API598
6. Mwayen: Dlo Fre, dlo lanmè, bagay manje, tout kalite lwil oliv, asid, likid alkalin elatriye.
-
DIN3202-F6 balanse valv chèk
1. Travay presyon: 1.0 / 1.6Mpa
2. Tanperati travay: -20℃～+120℃
3. Koneksyon bride selon DIN2532 DIN2533 DIN 2501 EN1092
4. fas a fas: DIN3202-F6
5. Estanda konsepsyon: DIN3356
6. mwayen: dlo, vapè, lwil elatriye.
-
BS5153 balanse valv chèk
1. Travay presyon: 1.0 / 1.6Mpa
2. Tanperati travay: -20℃～+120℃
3. Bride koneksyon selon BS4504
4. fas a fas: BS5153
5. Estanda konsepsyon: BS5153
6. mwayen: dlo, vapè, lwil elatriye.
-
Flange valv chèk silans
1. Travay presyon: 1.0 / 1.6Mpa
2. Tanperati travay:
NBR: 0 ℃ ~ + 80 ℃
EPDM: -10 ℃ ~ + 120 ℃
3. bride selon EN1092-2, PN10/16
4. Tès: DIN3230, API598
5. Mwayen: Dlo Fre, dlo lanmè, tout kalite lwil oliv, elatriye.
-
Threaded boul chèk valv
1. Travay presyon: 1.0 / 1.6Mpa
2. Tanperati travay:
NBR: 0 ℃ ~ + 80 ℃
EPDM: -10 ℃ ~ + 120 ℃
3. Kalite koneksyon: BSP oswa BSPT
4. Tès: DIN3230, API598
5. Mwayen: Dlo Fre, dlo lanmè, bagay manje, tout kalite lwil oliv, asid, likid alkalin elatriye.
-
Flange boul chèk valv
1. Travay presyon: 1.0 / 1.6Mpa
2. Tanperati travay:
NBR: 0 ℃ ~ + 80 ℃
EPDM: -10 ℃ ~ + 120 ℃
3. fas a fas selon DIN3202 F6, ANSI 125/150
4. bride selon EN1092-2, PN16/25.ANSI 125/150 elatriye.
5. Tès: DIN3230, API598
6. Mwayen: Dlo Fre, dlo lanmè, bagay manje, tout kalite lwil oliv, asid, likid alkalin elatriye.
-
Gwo Size Wafer Kalite Lift Valv Tcheke
1. Travay presyon: 4.0Mpa
2. Tanperati travay: -50℃～+400℃
3. fas a fas selon ANSI B16.5
4. bride selon EN1092-2, PN16/25/40.ANSI 150LB elatriye.
5. Tès: API598
6. Mwayen: Dlo Fre, dlo lanmè, bagay manje, tout kalite lwil oliv, asid, likid alkalin elatriye
-
Ti Size Wafer Kalite Lift Valv Tcheke
1. Travay presyon: 4.0Mpa
2. Tanperati travay: -100℃～+400℃
3. fas a fas selon DIN3202 K4
4. bride selon EN1092-2, etc.
5. Tès: DIN3230, API598
6. Mwayen: Dlo Fre, dlo lanmè, bagay manje, tout kalite lwil oliv, asid, likid alkalin elatriye.
-
Mens Single disk balanse valv chèk
1. Travay presyon: 1.0Mpa/1.6Mpa/2.5Mpa/4.0Mpa
2. Tanperati travay:
NBR: 0 ℃ ~ + 80 ℃
EPDM: -10 ℃ ~ + 120 ℃
VITON: -20℃～+180℃
3. fas a fas selon DIN, ANSI
4. Bride selon EN1092-2, ANSI 125/150 elatriye.
5. Tès: DIN3230, API598
6. Mwayen: Dlo Fre, dlo lanmè, bagay manje, tout kalite lwil oliv, asid, likid alkalin elatriye.
-
Valv dyafram tij k ap monte (nwa)
1. Travay presyon:
DN50-DN125: 1.0Mpa
DN150-DN200: 0.6Mpa
DN250-DN300: 0.4Mpa2. Tanperati travay: NR: -20℃～+60℃
3. fas a fas: EN588-1
4. Koneksyon bride selon EN1092-2, BS4504 ect.
5. Tès: DIN3230, API598
6. Mwayen: Siman, ajil, sann, angrè granulaire, likid solid, dlo fre, dlo lanmè, asid inòganik ak likid alkalin elatriye.
-
Nerjaveèi asye Single disk balanse valv chèk
1. Travay presyon: 1.0Mpa/1.6Mpa/2.5Mpa
2. Tanperati travay:
NBR: 0 ℃ ~ + 80 ℃
EPDM: -10 ℃ ~ + 120 ℃
VITON: -20℃～+180℃
3. fas a fas selon ANSI 125/150
4. Bride selon EN1092-2, ANSI 125/150 elatriye.
5. Tès: DIN3230, API598
6. Mwayen: Dlo Fre, dlo lanmè, bagay manje, tout kalite lwil oliv, asid, likid alkalin elatriye.
